Tascam CD-RW901 Owner's Manual

Also see for CD-RW901: Specifications Service manual Consultant’s Specification Owner's manual Specifications

TASCAM CD-RW901 When nearing the end of a track or disc, the EOM indica-tor will light up on the display.The number of seconds (1 to 99) before the track/discend that the indicator is displayed can be set beforehand.To set the message display time, use the EOM TRKor EOM DISC options on the PLAY sub-menu (see“Operation basics” on page 16).NOTEThis function cannot be used with MP playbackmode.End of disc/track message (EOM)Call function allows the unit’s playback position tobe returned to the point at which playback last startedfrom ready mode. If there is no “call point”, an errormessage NoCall PT!! will be displayed.NOTEThis function cannot be used with program, randomand MP playback mode.Call functionThis function allows the playing back a single track, andthe automatic cuing of the next track ready for playback.Combained with Auto Cue function, the unit will enterplayback ready mode at the start of the next track.Press AUTO READY key on the front panel or remotecontrol to set the function on. The A.READY indicator willlight up.Auto Ready functionWhen the auto cue function is on, when a track is select-ed, the point where sound begins (not where the trackbegins) on that track is located, and the unit enters play-back ready mode. Then, when the PLAY key is pressed,playback begins at exactly that point.Press AUTO CUE key on the front panel or remote con-trol to set the function on. The A.CUE indicator will lightup.Use the A_CUE LEVEL option to set the sound startposition detection level.Auto Cue functionWhen in playback or playback ready mode, if theERASE key is pressed, the display shows “RID”code on the screen. If there is no “RID” code on thedisc or the code has not been recorded on the disc,Incomplete! will appears on the display.Recorder Identification Data (RID)When in playback or playback ready mode, if theFAINALIZE key is pressed, the display shows “ISRC”code on the screen. If there is no “ISRC” code on thedisc or the code has not been recorded on the disc,Incomplete! will appears on the display.International Standard Recording Code (ISRC)In this function, when the unit is in playback mode, andwhen the PLAY key is pressed, the unit starts playbackfrom the beginning of the next track.Use the Menu option or the INC PLAY key on theremote control to set this mode on. The TRACK indicatorwill blink during playback or playback ready mode.When the STOP key is pressed, the unit will enter play-back ready mode at the start of the next track.Incremental playback4 − Playback operations