Tascam CD-RW901SL Owner's Manual

Also see for CD-RW901SL: Technical documentation

IMPORTANT SAFETY PRECAUTIONS10 TASCAM CD-RW901SL10 TASCAM CD-RW901SLFront panel2 43 5 7 9 0 q6 81w ue r t y i o p a s d f g h j k1 POWER switch The power switch is used to switchthe unit on and off.2 Disc slot Discs should be inserted label side upwardsinto the unit’s slot.Gently slide in a disc until the unit pulls the disc in.Note that if the unit does not pull the disc in, press theif the unit does not pull the disc in, press theot pull the disc in, press theEJECT key to cancel the action. Do not force the discin further to avoid damage to the unit.When a disc is inserted into the unit, the display showsTOC Reading for a short period while the unit deter-mines the contents of the disc.3 MENU key Use this key to call up the menu options(see “Operation basics” on page 16).4 EJECT key Use this key to eject the currently loadeddisc. The display shows Disc Eject.5 REPEAT key Use this key to set the repeat playbackmode on and off.6 ESCAPE key When in a menu mode, this key cancelsthe menu item selected.7 DISPLAY key Use this key to see the current disc titlewhen the disc is stopped. When the disc is playing or inready mode, press this key to see the current track title.8 TIME key Use this key to cycle through the timemodes shown on the display (see “Time display switch-ing” on page 20).9 Display The display is used to show the current statusof the unit, as well as the current menu settings.0 TIMER switch (PLAY, OFF) Using this key switchesTimer play on and off. See “Timer playback” on page21 for details.q INPUT (L,R) controls Use these concentric controls toadjust the level of the analog audio signals received atthe ANALOG IN jacks.w PHONES jack and the level control Use a standardpair of stereo headphones, equipped with a 1/4-inchplug, with this jack.Adjust the volume from the jack with the level control(turn clockwise for higher volume).e PITCH control Push this control to set the PitchControl on and off. Turning this control adjusts thevalue within ±16.0%.r AUTO CUE key Use this key to set Auto Cue on and off.t AUTO READY key Use this key to set Auto Ready onand off.y CALL key Pressing this key locates a track to the lastpoint where playback was previously started in playbackready mode, and puts the unit into playback ready mode.During recording, pressing this key assigns an indexnumber manually.u MULTI JOG dial Use this dial to select tracks for play-back, to set parameter values.In addition, pushing the dial acts like an ENTER key, i.e.the currently-displayed value or setting is confirmed.i FINALIZE/INS key Use this key to finalize recordablediscs (see “Finalizing” on page 33).When in playback or playback ready mode, pressingthis key shows the disc’s ISRC code on the display.It also acts like a space key when entering TEXT data(see “Title input operation” on page 35).o ERASE/DEL key Use this key (with CD-RW discsonly) to erase tracks, or a whole disc, or to refresha “bad” disc, or to unfinalize a finalized disc (see“Erasing” on page 34 for details).2 − Features of the CD-RW901SL