IMPORTANT SAFETY PRECAUTIONS0 TASCAM CD-RW901SL5 − Recording0 TASCAM CD-RW901SLManually divide trackWhile recording is taking place, press the RECORD key.The current track number is incremented by one.For details of automatic track division while recording, see“Automatic track division” on page 29.NOTEAccording to the “Red Book” (the specification foraudio CDs), a track cannot be less than four secondsin length, and there can be a maximum of 99 trackson an audio CD. Bear these limitations in mind whenadding track divisions.This operation can not be applied while recordingtrack 99.Manually incrementing index numbersThis function allows you to manually assign index numbers.1. Start recording.2. Press the CALL key at the point you want to assignan index number. Index XX where XX shows thenumber, will be displayed.NOTEThe maximum index number within a track is 99.When the unit reaches 99, it will increment the tracknumber and start assigning index numbers countingfrom one.Automatically Incrementing index numbersWhen recording with auto track function, when INDEXINC is set to on (see “Operation basics” on page 16), theunit overrides the setting of the automatic track division,and instead of incrementing track numbers, it incrementsthe index numbers within a track.Use the MULTI JOG dial or MENU (+/-) keys on the remotecontrol to switch INDEX INC on or off.Index XX where XX is index numbers will appear on thedisplay.NOTEThe maximum index number within a track is 99.When the unit reaches 99, it will increment the tracknumber and start assigning index numbers countingfrom one.Automatic track division with trim functionWhen Auto Track is set to either Level or DD mode,it is possible to trim the automatic track division pointusing A_TRK TRIM option in the REC sub-menu (see“Operation basics” on page 16). This function allows youto slip the start time of the track increment forwards orbackwards.NOTEWhen Auto Track mode is set to Time, the value set inAuto Track Trim is ignored.The available trim value is from -125 through +125 frames.Use the MULTI JOG dial or MENU (+/-) keys on the remotecontrol to adjust the trim value.Rec mute functionThe Rec mute function allows instant cut-off of the inputsignal, and records four seconds of silence on the disc.While recording is in progress, press the REC MUTE keyon the remote control.The display shows the Rec Mute flashing, the meters stopdisplaying the current level and the monitored sound is cut.After about four seconds, the unit enters record ready mode.NOTEThis function is only available from the remotecontrol unit.