IMPORTANT SAFETY PRECAUTIONS TASCAM CD-RW901SL TASCAM CD-RW901SLMessages during operationsMessage StatementBlank Disc A blank recordable disc has been inserted.Complete An operation such as finalize or erase has been successfully completed.Now OPC* Calibration is being performed to operate recording properly.Disc Repair The disc is being repaired, and this operation will take a long time. Please do not turn off the powerof the CD-RW901SL until it finishes.PMA Writing* The recorded content is being written to the disc.TOC Reading The table of contents data is being read.Incomplete! ISRC or RID codes have not been read by the unit, or there is no code on the disc.48k Fs Adj The 48k Fs adjustment function is on.Cont Rec CONT REC function is on.*OPC=Optimum power Control*PMA=Program memory AreaError messagesMessage Details / responseCan’t Rec! Cannot record. Either erase the contents of the disc (for a CD-RW), or use adifferent recordable disc.Disc Error! The disc has malfunctioned. Please replace with a new disc.Disc Full! No recording time remaining, or no recordable track is left on the disc.Text Full! No space to input the letters.Sure? Text! The text data is not written on the disc yet. Eject the disc to cancel the textyou entered or perform the finalize operation to write the data to the disc.Drive Error! There is a problem in the drive.D-IN UNLOCK! The digital input is not connected. Turn on the power of the equipmentconnected to DIGITAL IN.Not Audio! There is no audio signal from DIGITAL IN.Erase Error! An error occurred while erasing.Not Fs44.1k! The sampling frequency of the digital input is not 44.1 kHz. Please turn theSRC on.PGM Empty! There is no program.PGM Full! No new programs can be created.Can’t Edit! Editing cannot be performed due to operational restrictions.Can’t Sel! Menu selection cannot be performed due to selection restrictions.Rec Error! There was an error during recording. Please re-record.OPC Error! There was an error during OPC. Please re-record.No DIR! There is no directory that contains a file.Decode Err! The MP3 file cannot be played back.Format Err! The disc is in a format that the CD-RW901SL cannot read.EXT CLK Err! Can not synchronize with the digital input clock from the selectedsource. Check the connection with the source unit.No Call PT!!! There is no call point. Please set a call point.9 − Reference and specifications