Tascam CD-RW901SL Owner's Manual

Also see for CD-RW901SL: Technical documentation

IMPORTANT SAFETY INSTRUCTIONSTASCAM CD-RW901SL 14 − Playback operationsTASCAM CD-RW901SL 1Playback modesThere are four different playback modes. The selectedmode will be indicated on the left of the display.Continuous playback mode (default setting): no indica-tion lampSingle playback mode: SINGLE is litProgram playback mode: PROGRAM red lamp is litRandom playback mode: RANDOM red lamp is litThe playback mode can be selected using the P.MODEkey on the remote control unit. Pressing the key changesthe playback mode on the display in the following order:Continue®Single®Program®RandomYou can also select the playback mode using the PLAYMODE option in the PLAY sub-menu (see “Operationbasics” on page 16). Turning the MULTI JOG dial clock-••••wise changes the playback mode shown on the display inthe following order: Mode>Cont®Mode>Single®Mode>Program®Mode>RandomPressing the MENU key or pushing the MULTI JOG dialreturns to normal mode from the menu mode.While the mode can be changed from any playback mode,the explanation in this manual will assume the user isstarting from the Continuous mode.NOTEThe selected playback mode remains after power isturned off. However, the program playback mode willbe cleared to “Continuous” mode when the power isturned off.Continuous playbackPrograming is cancelled, and playback continues in thenormal order.1. When stopped, set the mode to display Continue orMode>Cont.2. Press the PLAY key to begin playback in order ofthe track number.Index searchThis Index search function allows you to search indexeswithin a track that were assigned during recording (see“Automatically Incrementing index numbers” on page 29).Use the SKIP MODE in the PLAY menu (see “Operationbasics” on page 16) and select the item “Index”. TheMULTI JOG dial or MENU (+/-) key on the remote controlcan be used to select.Index XX appears on the display.Select a track you want to assign indexes to, and put theunit in playback or playback ready mode.Use the ˚/¥ or ∆/˙ key to search through the indexes.The unit locates to the index selected, and starts play-back at that point, or goes into playback ready mode aftermoving to that point.NOTEThe Index search function does not operate withMP3 discs.Time skipWhile in playback or playback ready mode, Time skipfunction allows you to move the playback positionforwards or backwards by a minute.Use the SKIP MODE in the PLAY menu (see “Operationbasics” on page 16) and select the item “Time”. The MULTIJOG dial or MENU (+/-) key on the remote control can beused to select.Pressing the ˚/¥ or ∆/˙ key moves the playback posi-tion one minute forwards or backwards. The unit locatesand starts playback at that point.When the key is pressed in playback ready mode, the unitlocates and standbys at that point.NOTEIf the ∆/˙ key is pressed at a time less than oneminute from the begging of a track, the unit skips tothe head of the track.If the ˚/¥ key is pressed at less than one minutefrom the end of a track, the unit skips to the begin-ning of the next track. However, if the current track isthe last track on a disc or is the last track in programplayback mode, the unit stops and goes into playbackready mode when the last track ends.If the ∆/˙ key is pressed at less than one secondfrom the begging of a track, the unit skips to oneminute before the end of the previous track. Howev-er, if the current track is the first track on a disc or inprogram playback, and also when in random play-back, the unit skips to the beginning of the currenttrack, and goes into playback ready mode.The Time skip function does not operate with MP3discs.