IMPORTANT SAFETY PRECAUTIONS1 TASCAM CD-RW901SL4 − Playback operations1 TASCAM CD-RW901SLTrack searchPress the ∆/˚ search key continuously on the frontpanel, or the SEARCH ∆/˚ key on the remote control.To stop the search function, simply release the ∆/˚ orthe SEARCH key.NOTEThe search function does not operate with MP3 discs.Normal searchUsing the number keys on the remote control, the numberof the desired track can be entered directory. Even numberswith two or three digits can be entered easily. For example:Track 9: press ‘9’ and 009 will be displayed.Track 12: press ‘1’ and ‘2’ and 012 will be displayed.Track 103: press ‘1’ and ‘0’ and ‘3’ and 103 will be displayed.After input, press the PLAY key to start playback. Or, theREADY key to cue the track at its head position and enterplayback standby mode.You can also enter the track number and start playback bypushing the MULTI JOG dial or using the ENTER key.NOTEThis function cannot be used in Program or Random mode.Selecting by track numberDirect searchBy specifying time from the start of a certain track, you canstart playback from a specified point of a specified track.Basic operationDuring stop, play or playback standby modes, use thenumber keys on the remote control to input the three-digittrack number (such as 002 for track 2), then the desiredelapsed time (***min **sec) from the start of that track.Example: To specify 1 min 30 sec from the start of track 2,input “002 001 30.”During input, the counter in the display will flash.NOTERegardless of the time display mode (see “Timedisplay switching on page 20), the time from the startof the specified track is displayed.Pressing the CLEAR key cancels the input at any stageduring input.During stop or playback modes, when the final digit isentered, the desired position is automatically located andplayback will begin from the desired point. During play-back standby mode, at the desired point the unit will enterplayback standby mode.NOTEIf a point which does not exist is entered, DirectSearch time entry mode will be cancelled.The direct search function cannot be used in programor random mode.ªFor MP3 discs, time cannot be specified within a track.However, if you input the three-digit track number,playback will begin from the start of that track.Operation variationsEven if the final “seconds” time value is not input, play-back will begin from the selected “minutes” time afterpressing the ENTER or PLAY key. Or, if you press theREADY key, the unit will enter the playback standby modeat the selected point.Specifying a track number onlyAfter inputting the track number, press the ENTER orPLAY key to begin playback of that track, or the READYkey to cue the track and enter playback standby mode.NOTEInstead of inputting the three-digit track number, youcan input only the desired track number.Example: To specify track 3, input only “3”.Specifying to the minuteAfter inputting the three-digit track number and the numberof minutes after the start of the track, press the ENTER orPLAY key to begin playback of that track, or the READY keyto cue the track and enter playback standby mode.Example: To specify 1 min 00 sec from the start of track 2,input “002 001.”NOTEFollowing the above example, if “0021” is input, thesame position will be located.ªª