Tascam CD-VT2 Owner's Manual

Also see for CD-VT2: Specification sheet

IMPORTANT SAFETY INSTRUCTIONS2 TASCAM CD-VT2Listening to CDsSelecting the play modeThis device has the two following play modes.ALL mode (initial setting)This is the ordinary mode. Once you start playback, the discwill play through to the end.SINGLE modeAfter playback of a track is started, that track will play tothe end.Use the following procedures to select the play mode.1 Press MISC. to open the SETUP & MISC. screen.2 Use the CURSOR §/¶ keys to select PLAY MODE andthe VALUE (+, –) keys to select ALL or SINGLE.NOTEIf you select SINGLE, appears to the left of thetime display.Repeat playbackIn repeat playback mode, depending on the play mode setting,all tracks (ALL play mode) or the current track (SINGLE playmode) will play back repeatedly.When loop playback in ( ) out ( ) points are not set, press theLOOP key to start repeat playback.NOTEUse the REPEAT item on the SETUP & MISC. screen to setrepeat playback ON and OFF.When the repeat setting is set to ALL, appears.When the repeat setting is set to SINGLE, appears.