Tascam CD-VT2 Owner's Manual

Also see for CD-VT2: Specification sheet

IMPORTANT SAFETY INSTRUCTIONS1 TASCAM CD-VT2Using mics with the trainer3 Use the VALUE (+, –) keys to adjust the level. The levelknob icon rotates as you change the value.NOTEThe input meter at the bottom of this screen shows thetotal level of the signal input at the MIC IN jacks.Using built-in effectsThis device has a built-in mic effects processor. Press theEFFECT key to open the EFFECTOR screen.As shown in the figure above, in addition to BANK andPRESET, the EFFECTOR screen also shows the LVL (level)knob, an icon for the selected mic effect and the VCH (voicechange) icon. These all have adjustable settings.Use the CURSOR (˙, ¥) keys to move between the LVL knob,effect parameter knob and voice change icon. When you selectthe LVL knob or other parameter, a pop-up appears for thesetting items. Use the CURSOR (§, ¶) keys to select settingsin the pop-up, and use the VALUE (+, –) keys to adjust thesesettings.BANKSelect bank 01–05 or BYPASS.Using the PRESET item explained below, you can set apreset effect for each bank. By making presets of settings thatyou use frequently in each bank, you can quickly recall thesettings you desire just by switching through the banks.Select BYPASS if you do not want to use effects.