TASCAM DA-6400/DA-6400dp 234 – RecordingMaking word/video connectorsettingsSettings can be made for the WORD/VIDEO IN and WORD/VIDEO THRU/OUT connectors.1. Select the WORD/VIDEO SETUP item on theGENERAL page to open the WORD/VIDEO SETUPscreen. (See “Menu operation procedures” on page 16.)2. Set the word clock output signal.Option MeaningWORD OUT/TERM-ON (default)Set the signal output from theWORD/VIDEO OUT/THRUconnector to WORD OUT, andturn WORD/VIDEO IN connectortermination resistance (75Ω) on.WORD OUT/TERM-OFFSet the signal output from theWORD/VIDEO OUT/THRUconnector to WORD OUT, andturn WORD/VIDEO IN connectortermination resistance (75Ω) off.THRU OUT/TERM-OFFSet the signal output from theWORD/VIDEO OUT/THRUconnector to THRU output of thesignal from the WORD/VIDEOIN connector, and turn WORD/VIDEO IN connector terminationresistance (75Ω) off.3. Confirm the setting and return to the Menu Screen.Setting the reference levelYou can set the analog input and output headroom (differencebetween the maximum and reference levels).1. Select the REFERENCE LEVEL item on the GENERALpage to open the REFERENCE LEVEL screen. (See“Menu operation procedures” on page 16.)2. Set the reference level.Option Meaning-9dB +6dBu standard level, +15dBu maximum level-14dB +4dBu standard level, +18dBu maximum level-16dB +4dBu standard level, +20dBu maximum level-18dB(default) +4dBu standard level, +22dBu maximum level-20dB +4dBu standard level, +24dBu maximum level3. Confirm the setting and return to the Menu Screen.Setting input monitoringTurn input monitoring off before playing back recordings.Audio input through jacks for channels that have inputmonitoring on will be output from the unit's audio output jacks.1. Select the INPUT MONITOR item on the GENERALpage to open the INPUT MONITOR screen. (See “Menuoperation procedures” on page 16.)2. Set the input monitoring mode.Options:ALL ON: Turn input monitoring on for all channelsALL OFF (default): Turn input monitoring off for allchannelsIndividual: Allow input monitoring to be turnedon/off for specific channels individually or all at once3. Confirm the setting and return to the Menu Screen.