24 TASCAM DA-6400/DA-6400dp4 – RecordingSetting input monitoring for specificchannelsWhen the MODE on the INPUT MONITOR screen is set toIndividual, input monitoring can be turned on/off forspecific channels individually or all at once.1. Open the INPUT MONITOR screen. (See “Menuoperation procedures” on page 16.)2. On the INPUT MONITOR screen, set the inputmonitoring mode to Individual.Underneath the MODE item, the RANGE SELECT itemappears.3. Press the MULTI JOG dial to confirm and move the cursor tothe next item.Use the .// [MARK .//] buttons to move thecursor.When the cursor is at ON or OFF, press the MULTI JOG dial toopen a confirmation pop-up message.When the confirmation message is open, press the MULTIJOG dial to set all channels at once.Setting the first channel to be included when selecting a rangeof channels at onceOptions:CH01–CH63: First channel included when selecting arange of channels at onceCH02–CH64: Last channel included when selecting arange of channels at onceOFF/ON: Input monitoring status for range of channelsselected at once4. By moving the cursor to the input monitoring indicator area,you can set input monitoring for individual channels.Press the MULTI JOG dial to enable/disable monitoring forthe channel where the cursor is.NOTEYou can also turn the MULTI JOG dial to select a channel.Turn the MULTI JOG dial while pressing and holding theSHIFT button to move the cursor by 4 channels at a time.Making recording channel settings1. Select the REC FUNCTION item on the REC FILEFORMAT page to open the REC FUNCTION screen. (See“Menu operation procedures” on page 16.)2. Set the recording function mode.OptionsALL ON (default): Recording is enabled for all channelsALL OFF: Recording is disabled for all channelsIndividual: Allow recording to be enabled/disabled for specific channels individually or all at once3. Confirm the setting and return to the Menu Screen.Setting the record function for specificchannelsWhen the MODE on the REC FUNCTION screen is set toIndividual, recording can be enabled/disabled for specificchannels individually or all at once.1. Open the REC FUNCTION screen. (See “Menu operationprocedures” on page 16.)2. Set the recording function mode on the REC FUNCTIONscreen to Individual.Underneath the MODE item, the RANGE SELECT itemappears.3. Press the MULTI JOG dial to confirm and move the cursor tothe next item.Use the .// [MARK .//] buttons to move thecursor.When the cursor is at ON or OFF, press the MULTI JOG dial toopen a confirmation pop-up message.When the confirmation message is open, press the MULTIJOG dial to set all channels at once.Setting the first channel to be included when selecting allchannels at once