4IntroductionThank you for purchasing the TASCAM IF-FW/DM MK IIFireWire audio card for TASCAM mixers. It is designed toprovide audio and MIDI interfacing between your TASCAM mixerand your computer based DAW, turning your TASCAM mixer intoa high performance FireWire audio/MIDI interface.The TASCAM DM-3200 and DM-4800 digital mixers fullysupport the IF-FW/DM MK II and include a detailed status displayto enable easy setup of previously difficult FireWire audioscenarios.Patented JET PLL circuitry inside the IF-FW/DM MK II removesvirtually all digital jitter to keep your audio software and hardwarelocked together with industry-leading performance resulting in thecleanest audio possible. industry-leading performance resulting inthe cleanest audio possiblePlease take some time to look through this Owner’s Manual andfamiliarize yourself with the IF-FW/DM MK II’s features, setup andoperation. We suggest you pay particular attention to the setupnotes for your computer platform of choice (Mac or PC). You mayalso need to refer to your software’s documentation for a clearunderstanding of how to set up an audio/MIDI interface fromwithin your software. Your experience with the IF-FW/DM MK IIwill be greatly enhanced by a good working knowledge of youraudio software.Be sure to check the TASCAM web site at www.tascam.com toensure you have the latest software updates for your IF-FW/DMMK II.FeaturesThe IF-FW/DM MK II provides the following interfacing betweenyour TASCAM mixer and a host computer via FireWire:• 16 or 32 channels of Input to the mixer from the computer at44.1k, 48k, 88.2k and 96k sample rates.• 16 or 32 channels of Output from the mixer to the computer at44.1k, 48k, 88.2k and 96k sample rates