6System RequirementsMacintosh• OS: Mac OS X 10.4.4 or higher• Computer: Apple Macintosh series with on-board FireWire• PowerPC G4 1GHz or greater, or any Intel Mac.• Memory(RAM): 512MB or more• Higher spec required for 32 channel operation at 96 kHz. – seeSystem clocking section in this manual.Windows• OS: Microsoft® Windows® XP Home Edition or XPProfessional with Service Pack 2• Computer: Windows® XP Compatible PC equipped with anIEEE 1394/FireWire Port• Pentium®, Celeron®, or Pentium® compatible processor1.6GHz or higher• Higher spec required for 32 channel operation at 96 kHz. – seeSystem clocking section in this manual.• Memory(RAM): 512MB or moreDM-24 (not supported)The IF-FW/DM MK II is not supported in the DM-24. The previousgeneration IF-FW/DM is required instead, which provides 24x24channels at 44.1 kHz and 48 kHz sampling rates.DM-3200 RequirementsThe DM-3200 must be running software V1.30 or higher to use theIF-FW/DM MK II. A TFI update file for use with TMCompanion isprovided on the IF-FW/DM MK II CD ROM. You will need to haveTMCompanion installed; this can be found on the CD ROM thatcame with your DM-3200. You should always check theTASCAM website at www.tascam.com to obtain the latestavailable versions. Previous versions of the DM-3200 softwarewill not recognize the IF-FW/DM MK II.