4 – Features and their functions—Rear PanelTASCAM MD-CD1 Owner’s Manual 15z DISC, GROUP, TRACK display DISClights up when the display master deck has a discloaded and is stopped.GROUP lights up when the display master is the CDdeck and the Directory mode is on, or when the dis-play master is the MD deck and the group mode ison.TRACK is indicated during playback or playbackstandby.1 Character display Disc information, trackinformation, menu, message and operation status aredisplayed.2 This lights when the Timer Play function ison.3 CAPS, These light during title inputto indicate either CAPS or Japanese character mode.In lower case letter mode, there is no indication.4 EOM This lights when the remaining track/disc time is less than the EOM set value.Rear Panel5 ANALOG INPUT MD Terminals Theanalog line input terminals for the MD deck are forRCA pin jacks. Rated input level is –10 dBV.6 ANALOG OUTPUTS – CD – COMMON– MD Terminals The analog line output terminalsare for RCA pin jacks. Rated output level is –10 dBV.CD: Outputs the CD deck signal.COMMON: Outputs CD and MD signals. Duringplayback of both decks, the output signal depends onthe “COMMON?” option setting on the SYSTEMmenu.MD: Outputs the MD deck signal. During playback,the playback signal is output; during input monitor-ing, the source signal is output.7 DIGITAL (OPTICAL) INPUT TerminalThis is the digital input terminal for the MD deck.8 DIGITAL (OPTICAL) OUTPUTS – MD– CD Terminals These are the digital output ter-minals (optical). The playback signals from the MDdeck and the CD deck are output through theirrespective digital output terminals.9 CONTROL I/O (RS-232C) ConnectorRS-232C compatible serial control from an externalPC can be performed.H J K L :