Tascam MD-CD1 Owner's Manual

Also see for MD-CD1: Quick start guide Service manual

Contents

10 – MiniDisc editing—Erase disc42 TASCAM MD-CD1 Owner’s ManualSelecting a track to be erased on the menu1 1. In the stop mode, select the “ERASETRK?” option on the EDIT sub-menu of theMD menu.“Track>***” will be displayed, with *** rep-resenting the last track number.2 Select the track to be erased using theMULTI JOG dial on the front panel, or theMENU -/+ key on the remote control, andpress the ENTER key.“Sure?” is displayed.3 Press the ENTER key (or the YES key) onthe front panel, or the ENT/YES key on theremote control.After the track is erased, “Complete” isshown on the display.NOTEWhen a track is erased, the tracks are renumbered fromthe next track.Erase discAll the tracks on the disc can be erased in one opera-tion.1 Select the “ERASE DISC?” option on theEDIT sub-menu of the MD menu.“Sure?” is displayed.2 Press the ENTER key (or the YES key) onthe front panel, or the ENT/YES key on theremote control.After all the tracks on the disc are erased,“Complete” is shown on the display.Divide tracksTracks can be divided into two or more tracks.Example: To divide C and D contained intrack number 3 into two tracks1 Select the “DIVIDE?” option on the EDITsub-menu of the MD menu.2 Play back the track to be divided, and at thedesired divide point, press the ENTER key(or the YES key) on the front panel, or theENT/YES key on the remote control.“Point> 0” is displayed, and starting at thedivide point (specified in the above opera-tion) a few seconds are played back repeat-edly to enable confirmation.NOTEAs an alternate procedure to steps 1 and 2 above, playthe track to be divided, and at the desired point, putthe deck into playback standby mode. Then select the“DIVIDE?” option on the EDIT sub-menu of the MDmenu, and “Point> 0” will be displayed. Starting at thedivide point (specified in the above operation) a fewseconds are played back repeatedly to enable confirma-tion.3 If necessary, use the MULTI JOG dial on thefront panel, or the MENU -/+ key on theremote control to adjust the divide point.4 After the divide point has been set, press theENTER key (or the YES key) on the frontpanel, or the ENT/YES key on the remotecontrol.“Sure?” is displayed.5 Press the ENTER key (or the YES key) onthe front panel, or the ENT/YES key on theremote control.After the track is divided, “Complete” isshown on the display.NOTEIf a title has been added to the track, it will be retainedonly for the first of the new divided track. The seconddivided track will not have a title.