Tascam MD-CD1 Owner's Manual

Also see for MD-CD1: Quick start guide Service manual

Contents

7 – CD and MD Playback—Display master and remote master set-TASCAM MD-CD1 Owner’s Manual 25To remove the discFor a CD, press the OPEN/CLOSE key.For an MD, press the EJECT key.To play a desired trackFront panel operation:press either the or key to selectthe desired track.Remote control operation:use either the or keys, or thenumeral keys, to select the desired track.Refer to “Track selection” on page 25.Using headphonesPlug the headphone cord into the PHONES jacklocated under the POWER switch. Use the sourceselector switch to choose the desired source, andadjust the volume with the volume control. If thesource selector switch is set to COMMON, both CDand MD sources can be monitored. When both decksoutput a signal, the monitored source depends on the"COMMON?" option setting on the SYSTEM menu.WARNINGWhen using headphones, take care not to turn the vol-ume too high. Listening at high volumes for extendedperiods of time may result in permanent hearing dam-age.Display master and remote master settingsFor simple playback operation, the front panel keysor the remote control keys can be used. However, toensure that the deck and disc information is properlyshown on the display, the ‘display master’ settingmust be selected for the deck in use. Also, when per-forming various playback operations by remote con-trol, the ‘remote control master’ setting must beselected for the deck in use. Refer to “Display masterand remote control master” on page 20.To prevent operation errors, we recommend that thedisplay master and the remote control master be setfor the same deck.Track selectionUsing the skip functionSelect desired tracks for playback with the skip keys,/ on the front panel, or /on the remote control. After selecting the track, pressthe PLAY key to start playback, or the READY keyto cue the track and enter playback standby mode.To restart playback from the beginning of the track inplay, press the once. To skip to the previoustrack, press twice.To skip to the next track, press once.Selecting by track numberUsing the number keys on the remote control, thenumber of the desired track can be entered directly.Even numbers with two or three digits can be enteredeasily. For example:Track 9: press ‘9’ and 009 will be displayed.Track 12: press ‘1’ and ‘2’ and 012 will be dis-played.Track 103: press ‘1’ and ‘0’ and ‘3’ and 103 will bedisplayed.After input, press the PLAY key to start playback, orthe READY key to cue the track and enter playbackstandby mode.SearchDuring playback or playback standby, this functionenables the search of a desired portion within a trackfor playback.Front panel operation: press the / searchkey continuouslyRemote control operation: continuously press the/ search keyBe sure to hold the key down; if you quickly releaseit, the Skip function will operate.NOTEThe Search function does not operate with MP3 discs.