100 TASCAM SS-CDR250N / SS-R250N14 – Other Settings, Information Screens and Keyboard OperationsExporting/importing system backupdata(USB flash drives and SD cards only)You can export system backup data from the unit's built-inmemory to an SD card or USB flash drive loaded in the unit. Youcan also import this data.NOTEExporting and importing are not possible when the currentmedium is CD.1. Select SYSTEM BACKUP on the SYSTEM 1 page to open theSYSTEM BACKUP screen. (See “Menu operation procedures”on page 22.)2. Select whether to export or import system backup data toor from the SD card or USB flash drive.EXPORT: Export system backup data to the SD card or USBflash drive.IMPORT: Import system backup data from the SD card orUSB flash drive.3. Press the MULTI JOG dial.A confirmation pop-up message will appear.Pop-up message when set to EXPORTPop-up message when set to IMPORT4. When the confirmation message is open, press and hold theMULTI JOG dial to begin exporting to or importing from theSD card or USB flash drive.When exporting/importing ends, the SYSTEM BACKUP screenreopens.i The following setting items are saved and loaded with systembackup data.Screen name Page name Setting itemHome ScreenTime counter displaymodeSolo selection channelLOCK SETUPscreen All settingsMenu ScreenPLAY 1 page All settingsPLAY 2 page All settingsPLAY 3 page All settingsREC 1 page All settingsREC 2 page All settingsREC 3 page All settingsREC 4 page All settingsREC 5 page All settingsTIMER EVENT page TIMER EVENT itemNETWORK 1 page All settingsFTP CLIENT pageTARGET FTP SERVERscreen SERVER AD-DRESS and USER IDitemsFTPS MODE itemTARGET FOLDER NAMEitemAUTO UPLOAD itemSNTP page All settingsUTILITY page All settingsPREFERENCES page All settingsREMOTE page All settings
