TASCAM SS-CDR250N / SS-R250N 496 – Using the audio CD BROWSE screen (SS-CDR250N only)You can use the BROWSE screen with an audio CD to select tracksfor playback. In addition, you can edit CD-TEXT on unfinalizedCD-R/CD-RW discs in the audio CD format.In the following explanations, we assume that an audio CD isloaded and that CD is selected as the current medium.Opening the audio CD BROWSE screenWhen the unit is playing back, in playback standby or stopped,press the PITCH [BROWSE] button while pressing the SHIFTbutton to open the audio CD BROWSE screen.This screen shows the tracks in numerical order.Closing the BROWSE screen and returning to the HomeScreen:Press the HOME [INFO] button (or remote control F2 button).Selecting a track to playFollow the procedures below select tracks for playback from theaudio CD BROWSE screen.1. Open the BROWSE screen and select the track that you wantto play.2. Press the PLAY button (or remote control PLAY button).When stopped, doing this will start playback of the selectedtrack.When in playback standby, doing this will start playbackstandby at the beginning of the selected track.NOTEYou can also use the file menu SELECT item to set the select-ed track as the current track.Editing CD-TEXT(CD-R/CD-RW discs only)If an unfinalized CD-R/CD-RW disc in the audio CD format isloaded, you can edit CD-TEXT on it using the following proce-dures.1. Open the BROWSE screen and select the desired track.2. Press the MULTI JOG dial to open the pop-up file menu. (See“File operations” on page 44.)3. Select RENAME, and open the RENAME TRACK screen.4. Edit the name.For details about how to edit the text, see “Editing text” onpage 64.5. After you finish editing the CD-TEXT, select ENTER to confirmthe change.After CD-TEXT editing completes, the BROWSE screen re-opens.CAUTIONi If you press the EJECT button, a pop-up warning messagewill appear. Finalize the disc in order to save the CD-TEXT. (See“Finalizing CD-R/CD-RW discs” on page 73.)i On a text input screen, characters other than half-width (nor-mal) English letters, numerals and symbols will not be shown.If text includes characters other than half-width English let-ters, numerals and symbols, opening a text input screen willdelete them.i The following symbols and punctuation marks cannot beused in text.¥ / : * ? “ ” < > |
