TASCAM SS-CDR250N / SS-R250N 9914 – Other Settings, Information Screens and Keyboard OperationsViewing media informationYou can view information about the current medium.1. Select MEDIA INFORMATION on the MEDIA page to open theMEDIA INFORMATION screen. (See “Menu operation proce-dures” on page 22.)You can view information about the current medium, andcheck its total capacity, open space and other use condi-tions.2. Press the MULTI JOG dial to return to the menu screen.Restoring factory default settingsYou can restore the various settings stored in the backup memo-ry of the unit to their factory default values.Use the following menu procedures to do so.1. Select FACTORY PRESET on the SYSTEM 1 page. (See “Menuoperation procedures” on page 22.)2. Press the MULTI JOG dial.A confirmation pop-up message will appear.NOTEPress the MENU [JOG] button to cancel execution.3. Press the MULTI JOG dial again to restore the factory de-fault settings.A “READING MEDIA...” pop-up will appear. After it com-pletes, the Menu Screen will reopen.Saving and loading user settingsThis unit can store three sets of user setting data in its built-inmemory.Saving user settingsThis unit can save user setting data in its built-in memory.1. Select SAVE USER PRESET on the SYSTEM 1 page to openthe SAVE USER PRESET screen. (See “Menu operation proce-dures” on page 22.)2. Select SAVE TO USER1 – SAVE TO USER3 as the destinationto save the settings, and press the MULTI JOG dial.A confirmation pop-up message will appear.3. When the confirmation message is open, press and holdthe MULTI JOG dial to begin saving the user settings to thebuilt-in memory.After saving completes, the SAVE USER PRESET screen re-opens.Loading user settingsThis unit can load saved user settings from its built-in memory.1. Select LOAD USER PRESET on the SYSTEM 1 page to openthe LOAD USER PRESET screen. (See “Menu operation proce-dures” on page 22.)2. Select LOAD USER1 – LOAD USER3 to load the settings in thatpreset, and press the MULTI JOG dial.A confirmation pop-up message will appear.3. When the confirmation message is open, press and hold theMULTI JOG dial to begin loading the user settings from thebuilt-in memory.After saving completes, the LOAD USER PRESET screen re-opens.
