36 TASCAM SS-CDR250N / SS-R250N4 – PlaybackUsing the auto ready functionIf the auto ready function is on, after playback of a track com-pletes, playback will pause at the beginning of the next track.1. Select AUTO READY on the PLAY 1 page to open the AUTOREADY screen. (See “Menu operation procedures” on page22.)2. Turn the auto ready function on or off.Options: OFF (default), ON3. Confirm the setting and return to the Menu Screen.NOTEi When the auto ready function is on, the icon ap-pears in the playback screen function activation status area.i If the auto cue function is also on, playback will pause at thepoint where sound starts rather than the beginning of thetrack.i When playing back using the flash start function, the autoready function is disabled.Using the incremental playback functionWhen the incremental playback function is on, press the mainunit or remote control PLAY button during playback to startplayback from the beginning of the next track, or press the mainunit or remote control STOP button during playback to pause atthe beginning of the next track.1. Select INCREMENTAL PLAY on the PLAY 2 page to open theINCREMENTAL PLAY screen. (See “Menu operation proce-dures” on page 22.)2. Turn the incremental playback function on or off.Options: OFF (default), ON3. Confirm the setting and return to the Menu Screen.NOTEi When the incremental playback function is on, theicon appears in the playback screen function activation statusarea.i When the incremental playback function is on and playbackis paused, press the main unit or remote control PLAY buttonto start playback from that point.When playback is paused press the main unit or remotecontrol STOP button to stop playback. When the last trackis playing back, press the main unit or remote control PLAYbutton to start playback from the beginning of the first trackin the playback area, or press the main unit or remote controlSTOP button to pause at the beginning of the first track inthe playback area.Playing back in monoStereo audio files can be played back in mono. The left and righttrack channel signals are mixed together, and this mix is outputfrom both the left and right channels.1. Select MONO MIX on the PLAY 2 page to open the MONO MIXscreen. (See “Menu operation procedures” on page 22.)2. Turn the mono playback function on or off.Options: OFF (default), ON3. Confirm the setting and return to the Menu Screen.
