TASCAM SS-CDR250N / SS-R250N 678 – RecordingIncrementing track numbers automaticallyUse the menu to select the automatic track incrementationmode and make specific settings.When the automatic track incrementation function is on, theicon appears in the recording function activation statusarea on the recording screen.Automatic track incrementation function settings can bechanged anytime, even after starting recording.NOTEIf tracks are recorded in WAV format, you can also divide andcombine them after recording using the editing functions.(See “Dividing tracks (DIVIDE)” on page 71.), (See “Combin-ing tracks (COMBINE)” on page 72.)1. Select the AUTO TRACK item on the REC 5 page to open theAUTO TRACK screen. (See “Menu operation procedures” onpage 22.)2. Set the automatic track incrementation mode.Option MeaningOFF (default) Tracks will not be automatically incremented.LEVELThe track number will be incremented whenthe signal stays below the automatic tracklevel (AUTO TRACK screen LEVEL setting) forat least two seconds, and then the signalexceeds the level.DDWhen a digital source (CD, DAT, MD) is beingrecorded through a digital input, tracknumbers will be incremented when track di-visions on the source are detected. When re-cording an analog source or a digital sourcein any other manner, however, LEVEL modewill be used and tracks will be implementedin response to the input level.SIZE The track number will be incremented whenthe file reaches a set size.TIME The track number will be incremented at settime intervals.3. The setting items differ depending on the set automatictrack incrementation mode.LEVEL mode selectedSelect the LEVEL item, and set the automatic track incre-mentation level.Options: -72dB, -66dB, -60dB, -54dB (default), -48dB,-42dB, -36dB, -30dB, -24dBSelect DELAY, and set the delay until incrementation aftera signal is detected that exceeds the automatic track incre-mentation level (10 msec = 0.01 sec).By setting this to a negative value, recording can be start-ed before signal detection (using the memory buffer).Options: -1000msec – 0msec (default, 10msec incre-ments) – +1000msecDD mode selectedOptions: -1000msec – 0msec (default, 10msec increments)– +1000msecSIZE mode selectedOptions: 640MByte, 1GByte, 2GByte (default)TIME mode selectedOptions: 1min – 5min (default) – 10min, 15min, 30min,1hour, 2hour, 6hour, 8hour, 12hour, 24hour
