Tascam TM-D4000 Operation Manual

Also see for TM-D4000: Owner's manual Technical documentation

Software Overview3.6 Mixer ViewWhen the automation software is launched, the Mixer View is displayed showing keyinformation about the automated mix including fader and knob positions, cuts, EQstatus, etc.GroupIndicatorsIf the channel is part of a fader and/or cut group, the group number is shown herealong with the group's color (fader groups are shown in the left box, cut groupsin the rightMode Indicator This shows the mode of the channel: Read, Write, Manual or Update.Solo controland indicator Turns red when the channel is being soloed.EQ Controland Indicator Turns the equalization on and off for the channelCut Button Turns red to indicate that the channel is cut.Panpot andIndicatorSets and shows the channel's panpot position. The center position (as shown here)is represented by "C".Fader Sets and shows the channel's fader position.Level Indicator The level of the logical fader in dB relative to nominal is displayed here.Label Channel label. Click here and type in up to four alphanumericcharacters.ChannelNumber The number under the fader corresponds to the number of the TM-D4000's channel.Stereo linked fadersare shown with a"gang bar" linking the twoon-screen faders.LogicalPhysicalThe Logical fader shows the true level of a channel at any moment. Thisis the fader that automatically moves during playback.The Physical fader shows the position of the hardware fader on theTM-D4000. The physical fader only appears when the position of thefader on the mixer is different from the true audio level. When the twoare in agreement, the physical fader is concealed and the faderis said to be "nulled".Click the gray labeljust below the levelindicator to enter a4-character namefor the channel.10