Tascam X-9 Owner's Manual
                                    | |
Contents
|
TASCAM X-9 Owner’s Manual 175 – MenusThe X-9 uses a menu system to allow various func-tions to be enabled.You should read through the menu section (“Menureference” on page 17) to find out exactly what ispossible—the X-9 may possibly do more than youfirst thought, thanks to the menu system.To use the menus:1 Press the FUNCTION key.2 Turn the DATA knob to select the menudescription (a 4-character code shown on thedisplay).3 Press ENTER to confirm that you want to usethis menu.4 Turn the DATA knob to change the value forthe menu.5 Some menus have only one setting. For thesemenus, press ENTER to confirm the settingand leave the menu system.For menus with two settings (for example,first selecting the sampler whose settings willbe changed and then changing the setting),press ENTER to confirm the first setting.6 Turn the DATA knob to set the next value.7 Press ENTER to confirm the setting and leavethe menu system.Typically, most menus can be performed using eitherthe right and left menu systems (consisting of keys,dial and display).The menus and the different settings you can makeare listed in “Menu reference” on page 17.These menu controls are also used with the effectsunits, as explained here (“Effects” on page 23).How the X-9 shows charactersIt’s usually fairly clear what’s being shown on the X-9 display. However, you may want to refer to thischart if you are not quite sure how things are beingshown:Menu referenceThe following table provides a list of the menuoptions available on the X-9, together with theparameters available and their meaning.In this table, default (factory) settings are markedwith a *.See “Menus” on page 17 for details of how to use themenu system.1234675A B C D E F G H I J K L M N O P Q R S T U V W X Y ZA B c D E F G H I J K L M N O P Q R S T U V W X Y Z0 1 2 3 4 5 6 7 8 9 - _ +0 1 2 3 4 5 6 7 8 9 - _ + |
Related manuals for Tascam X-9
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine