Terex PT-50 Service Manual
Also see for PT-50: Operation and maintenance manual
                                                                                     | |
Contents
| 
Figure 9-48. Pull the joystick away from the cab wall as shown.Figure 9-59. The hydraulic hoses are now accessible. Labelthem and the ports they connect to to aid duringreassembly, then disconnect them and cap andplug the openings to prevent spills.Figure 9-610. Disconnect the electrical connections shown tofree the joystick from the machine, then remove.11. Reverse the removal procedure to reinstall the joystick. Take care to ensure all connections are tothe appropriate ports on the joystick and that theyare tight and leak free.Note: If it is neccessary to remove the left joystick on amachine equipped with a heater, you must disconnectthe (cool) heater lines at the heater unit in order toremove the side panel. Cap and plug hoses and portsto minimize coolant loss.Loader Float Magnet Removal andInstallationThe tools required for loader float magnet removal andinstallation are listed in Table 9-2. Use manufacturerrecommended tools whenever possible.Table 9-2Loader Float Magnet RemovalFigure 9-71. Remove the zip tie securing the lower portion ofthe joystick boot to the joystick as shown.Figure 9-82. Lift the boot to expose the magnet and joystickmounting bolts. Remove the joystick mountingbolts to allow the joystick to be moved upwardwithin the bracket.9-3Rubber Track Loader9. Loader/Transmission ControlsAllen (hex) WrenchesCombination WrenchesScrewdriverRequired ToolsRemove |
Related manuals for Terex PT-50
manualsdatabase
Your AI-powered manual search engine