Rubber Track Loader13. Maintenance13-6Bleeding the Fuel SystemThe tools required for bleeding the fuel system arelisted below. Use manufacturer-recommended toolswhenever possible.Table 16-1Required ToolsCombination WrenchIf the machine has been run out of fuel, it may benecessary to bleed the fuel system.Figure 11-251. Locate the bleed screw directly above the fuelinjection pump.2. Loosen the bleed screw two full turns.Figure 11-273. Pump the bulb primer with your hand until fuelflows from the bleed screw without any air bub-bles.4. Tighten the bleed screw.BleedScrew
