Ubee DDW262.G User Manual
                                                                                | |
Contents
| 
Ubee Interactive Using the Gateway DHCP OptionUbee DDW262.G Wireless Cable Modem and Router Subscriber User Guide • September 2011 315.3 Using the Gateway DHCP OptionThe DHCP option allows you to configure DHCP server-specific behavior on the device.StepsTo configure DHCP settings:1. Access the Web interface.2. Click the Gateway link from the top of the screen.3. Click DHCP from the left side of the screen. The DHCP fields are explained followingWAN Connection Type Defines the WAN connection type. For each type, differentdata entry is required, as explained below: DHCP: The WAN interface is set to be a DHCP client,and the IP address is assigned by the service provider’sDHCP server. For more detailed configuration of theDHCP server on the device, refer to Using the GatewayDHCP Option on page 31. Static IP: For Static IP, you must manually enter the IPaddress for the WAN interface. PPTP (dhcp): For Point to Point Tunneling ProtocolDHCP, you must enter a username, password, the PPTPserver’s host name or IP address, and the MTU size. PPTP (static): For Point to Point Tunneling ProtocolStatic, you must enter the static IP address, IP mask,default gateway, username, password, and the PPTPserver’s hostname or IP address, and the MTU size. L2TP (dhcp): For layer 2 tunneling protocol (dhcp), youmust enter a username, password, the L2TP server’shost name or IP address, and the MTU size. L2TP (static): For layer 2 tunneling protocol (static), youmust enter the static IP address, IP mask, defaultgateway, username, password, the L2TP server’s hostname or IP address, and the MTU size.Host Name Defines the host name for the router. This may be required bysome service providers.Domain Name Defines the domain for the router. This may be required bysome service providers.MTU Size Defines the Maximum Transmission Unit size, which definesthe largest size of the packet or frame that the device cantransfer (256-1500).Apply Saves all changes made in the screen.Label Description |
Related manuals for Ubee DDW262.G
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine