Ubee Interactive Using the Gateway DHCP Static Lease OptionUbee DDW262.G Wireless Cable Modem and Router Subscriber User Guide • September 2011 335.4 Using the Gateway DHCP Static Lease OptionThe Static Lease option allows you to assign static IP addresses to clients on yournetwork using the IP addresses acquired through the DHCP server on the cablemodem.The IP address must be part of the active DHCP IP pool configured on thisdevice.StepsTo assign static IP addresses:1. Access the Web interface.2. Click the Gateway link from the top of the screen.3. Click Static Lease from the left side of the screen. The Static Lease fields areApply Click Apply to save all changes.DHCP Clients Lists all DHCP clients currently connected to the cablemodem, either via Ethernet link, or via wireless connection.Each client is also listed with the following information: MAC Address / IP Address / Subnet Mask Duration displays the accumulated time since the clientacquired the IP address. Expires is the time until the IP lease time ends and mustbe recycled. If the IP address is reserved to a certain host,it shows “STATIC IP ADDRESS.” Select reserves the current private IP address to beassigned to this host statically when the radio button isselected.Force Available Activates a selected rule in the DHCP Clients List, and assignsthe displayed private IP address statically to the connectednetwork client. The Select button must be selected.Label Description
