Ubee DDW262.G User Manual

Contents

Ubee DDW262.G User Manual Manual pdf 56 page image

Using the Wireless Access Control Option Ubee Interactive52 Ubee DDW262.G Wireless Cable Modem and Router Subscriber User Guide • September 20116.3 Using the Wireless Access Control OptionThe Access Control option allows you to configure which clients can access yourwireless network.StepsTo configure client access:1. Access the Web interface.2. Click the Wireless link from the top of the screen.3. Click Access Control from the left side of the screen. The Access Control fields areexplained following this screen example.802.1x Authentication Enables or disables 802.1x to authenticate wireless clients.Network Key 1-4 Lets you pre-define up to 4 keys for 64-bit or 128-bit (64-bitkeys require 10 hexadecimal digits) (128-bit key require 26hexadecimal digits).Current Network Key Selects one of the four pre-defined keys as the current networkkey.Passphrase Sets the WEP encryption key by entering a word or group ofprintable characters in the Passphrase box and clickingGenerate WEP keys. These characters are case sensitive.Generate WEP Keys Forces the device to generate 4 WEP keys automatically.Apply Saves the wireless configurations when clicked.Automatic SecurityConfigurationSets up WPS (Wi-Fi Protected Setup) for devices connectingto the wireless network.Device Name Defines a name for this wireless cable modem for WPS.PIN Defines the Personal Identification Number for this wirelesscable modem.Configure Applies the WPS-Device Name/PIN Setup.WPS Add Client/PushButton/PINSelects which method to have connecting wireless clientsconnect to the wireless network: Push Button or PIN. If PIN isselected, enter the PIN clients need to enter to access theDDW262.G. For push button, a client pushes a button, eitheron the device or in software on the device, and then on thewireless cable modem to establish secure communications.Apply Saves WPS configurations when clicked.Label Description