Ubee DDW365 Wireless Cable Modem Subscriber User Guide • October 2013 92 Installing the DDW365Use the information in this chapter to set up and connect the DDW365, connect additionaldevices, and troubleshoot the installation.TopicsSee the following topics: Setting Up and Connecting the DDW365 on page 9 Connecting Devices to the Network on page 10 Troubleshooting the Installation on page 122.1 Setting Up and Connecting the DDW365Use the following instructions to set up and connect the DDW365. When the device is setup and connected, refer to Accessing the Web User Interface Locally on page 13 toconfigure the device.Important: Subscribers will need to contact their service provider to enable Internetaccess and wireless networking.Typically, the service provider initially configures and connects the device. The installationsteps are provided below if you wish to confirm the setup, or add devices to your network.Refer to Connecting Devices to the Network on page 10.StepsTo set up the device:1. Remove the contents from the device packaging.2. Place the DDW365 in a central location to connect to other devices, such as PCs orgaming consoles. Place the DDW365 and wireless clients in open areas far away from transformers,heavy-duty motors, microwave ovens, refrigerators, fluorescent lights, and othermanufacturing equipment. These items can impact wireless signals. A wirelesssignal can become weaker after it has passed through metal, concrete, brick,walls, or floors. Place the device in a location that has an operating temperature of 0˚ C to40˚ C (32˚ F to 104˚ F). Refer to Understanding LED Behavior on page 5 for moresafety information.3. Power on your PC. The PC must have an Ethernet network adapter or Ethernet portand an Internet browser installed, such as Internet Explorer. The following browsersare supported: For Windows 2000, XP, Vista, Windows 7, Windows 8, Google Chrome, Firefox1.07 and higher, Internet Explorer v7 and above.