Ubee Interactive Using the Access Control OptionUbee DDW365 Wireless Cable Modem Subscriber User Guide • October 2013 709.2.1 Enabling a Closed Network on the Primary NetworkYou can enable the Closed Network option so the SSID cannot be broadcast or seen byothers.StepsTo enable a closed network:1. Access the pull down menu for the Closed Network.2. Choose Enabled to enable a closed network. Automatic Security Configuration isdisabled.Note: WPS must be disabled before Closed Network can be enabled.9.3 Using the Access Control OptionUse the Access Control option to configure which clients can access your wirelessnetwork.WPS Add ClientAdd a client Activates wireless protected setup (WPS) security on thedevice.To add a client:1. Click Add a client. The WPS Add Client screen isdisplayed.2. Click PUSH on the WPS Add Client screen.The WPSbutton is activated on the device, indicated by a flashingwhite light on top of the unit.3. Press the WPS button on the device.Client PIN Defines a PIN number for client access.Authorized Client MAC Defines the MAC address of the authorized client.Label Description
