Ubee DDW365 User Manual
Also see for DDW365: User guide
                                                                                        | |
Contents
| 
Ubee Interactive Deploying and Troubleshooting the Wireless NetworkUbee DDW365 Wireless Cable Modem Subscriber User Guide • October 2013 76StepsTo configure the modem as a bridge:1. Click Wireless from the main menu.2. Click Bridging from the left side menu. Field descriptions are listed below the screenexample.9.6 Deploying and Troubleshooting the Wireless NetworkUse the information in this section to help you understand, deploy, and troubleshoot yourwireless environments: Understanding Received Signal Strength on page 76 Estimating Wireless Cable Modem to Wireless Client Distances on page 77 Selecting a Wireless Channel on page 79Understanding Received Signal StrengthReceived signal strength (RSSI) is measured from connected wireless client devices tothe DDW365. This value can significantly impact wireless speeds/performance. It isdetermined by: Materials (for example, open air, concrete, trees) Distance between wireless clients and the wireless cable modem Wireless capabilities of the client devicesLabel DescriptionWireless Bridging Enables or disables bridging.Remote Bridges Defines the MAC addresses of other wireless access points thatyou want to establish a bridge to and from. These access pointsmust also have bridging enabled.Apply Saves all changes. |
Related manuals for Ubee DDW365
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine