Ubee DDW365 User Manual

Also see for DDW365: User guide

Contents

Ubee DDW365 User Manual Manual pdf 14 page image

Ubee Interactive Connecting Devices to the NetworkUbee DDW365 Wireless Cable Modem Subscriber User Guide • October 2013 10 For MAC OS X, 10.2, and higher: Firefox 1.07 and higher, Safari 1.x and higher.4. Connect the power cable included in the product package to the back of the DDW365and plug the other end into the power outlet.5. Connect the network cable included in the product package to your computer’sEthernet port. Connect the other end to the ETH1, ETH2, ETH3, or ETH4 port on theDDW365.6. Connect a coaxial cable from the CABLE connector on the back of the device to thecable wall outlet, or to a cable splitter connected to the wall outlet.7. Validate the network connection using the device LEDs to confirm operations. The WiFi LED must be flashing or solidly lit. The PWR, US/DS, and ONLINE LEDs are solidly lit.Refer to Understanding LED Behavior on page 5 for more information.2.2Connecting Devices to the NetworkUse the instructions below to connect network devices and validate device functionality.TopicsSee the following topics: Connecting an Ethernet Device on page 10 Connecting a Wireless Device on page 112.2.1 Connecting an Ethernet DeviceYou can connect up to three additional Ethernet devices to the DDW365.StepsTo connect another Ethernet device to the network:1. Connect the Ethernet cable from the Ethernet device (for example, a PC or gamingconsole) to an open Ethernet port on the back of the DDW365.2. Use the device LEDs to confirm operations. Refer to Understanding LED Behavior onpage 5 for more information.3. Open a Web browser and go to any Web site to validate network/Internet connectivity(for example, http://www.wikipedia.org).4. If the connected device is a gaming console, perform any online task supported by theconsole (for example, log into the gaming server, play an online game, downloadcontent).