Ubee DDW365 User Manual
Also see for DDW365: User guide
                                                                                        | |
Contents
| 
Ubee Interactive Using the DHCP OptionUbee DDW365 Wireless Cable Modem Subscriber User Guide • October 2013 295.2 Using the DHCP OptionUse the DHCP option to configure dynamic host configuration protocol-specific behavioron the device.StepsTo configure DHCP settings:1. Click Basic from the main menu.2. Click DHCP from the left side menu. Field descriptions are listed below the screenexample.WAN Connection Type Selects the WAN connection type. For each type, different dataentry is required, as explained below: DHCP: The WAN interface is set to a DHCP client, andthe IP address is assigned by the service provider’s DHCPserver. Static IP: For Static IP, you must manually enter the IPaddress for the WAN interface. PPTP (dhcp): For Point to Point Tunneling Protocol(PPTP), you must enter a username, password, and thePPTP server’s IP address. PPTP (static): L2TP (dhcp): L2TP (static):Host Name Defines the host name for the router. This may be required bysome service providers.Domain Name Defines the domain name for the router. This may be requiredby some service providers.IPv4 MTU Size Defines the maximum transmission unit (MTU) size. MTUdefines the largest size of the packet or frame that the devicecan transfer (256-1500). If this is not given by your serviceprovider, use 0 for the default.Apply Saves changes.Label Description |
Related manuals for Ubee DDW365
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine