administration.fmA31003-S2030-M100-11-76A9, 01/2015OpenStage SIP V3R3 for OpenScape Voice, Administration Manual 185AdministrationMultiline Appearance/Keyset• if Preselection is selected then the line status is displayed after 1st line press• if Single button is selected then bridging is invoked (if line busy, bridging enabled)In case the Preview key is pressed first and then the line key, the Preselection mode configu-ration is not relevant.• if Preview mode is activated then the Preview key LED remains on (preview mode must bedeactivated manually by pressing the Preview key again).• if Preview mode is deactivated then the Preview key LED is turned off after preview timerexpiry– if Bridging priority= Bridging overrides preview then pressing the busy line key invokesbridging– if Bridging priority= Preview overrides bridging then pressing the line key displays theline status, however pressing the line key twice bridging will be invoked.3.11.4 Immediate RingEnables or disables the preset delay for all line keys. This feature only applies to keyset lines.The label displayed to the left of the key is defined in Key label .Administration via WBMSystem > Features > Program keys > Immediate ring3.11.5 Direct Station Select (DSS)A DSS key is a special variant of a line key. It enables a direct connection to a target phone,allowing the user to pick up or forward a call alerting the DSS target and make/complete a callto the DSS target.> This feature is available only on OpenStage 15/40/60/80, and requires OpenScapeVoice.> This feature can be enabled or disabled under System > Features > Feature access(see Section 3.6, “Feature Access”).Key.label 3Immediate ringImmediate ringSubmit Reset
