administration.fmA31003-S2030-M100-11-76A9, 01/2015OpenStage SIP V3R3 for OpenScape Voice, Administration Manual 293AdministrationDiagnostics3.26.12 QoS Reports3.26.12.1 Conditions and Thresholds for Report GenerationThe generation of QoS (Quality of Service) reports which are sent to a QCU server (see Section3.3.9, “SNMP”) is configured here.Data required• Report mode: Sets the conditions for generating a QoS report.Value range:• "OFF": No reports are generated.• "EOS Threshold exceeded": Default value. A report is created if a) a telephone con-versation longer than the Minimum session length has just ended, and b) a thresholdvalue has been exceeded during the conversation.• "EOR Threshold exceeded": A report is created if a) the report interval has just passed,and b) a threshold value has been exceeded during the observation interval.• "EOS (End of Session)": A report is created if a telephone conversation longer thanthe Minimum session length has just ended.• "EOR (End of Report Interval)": A report is created if the report interval has justpassed.• Report interval (seconds): Time interval between the periodical observations.Default: 60• Observation interval (seconds): During this time interval, the traffic is observed.Value: 10• Minimum session length (100 millisecond units): When the Report mode is set to "EOSThreshold exceeded" or "EOS (End of Session)", a report can be created only if the dura-tion of the conversation exceeds this value.Default: 20• Maximum jitter (milliseconds): When the jitter exceeds this value, a report is generated.Default: 20• Average round trip delay (milliseconds): When the average round trip time exceeds thisvalue, a report is generated.Default: 100> For details about the functionality, please refer to the release notes.
