administration.fmA31003-S2030-M100-11-76A9, 01/2015OpenStage SIP V3R3 for OpenScape Voice, Administration Manual 301AdministrationDiagnostics3.26.14 Remote Tracing – SyslogAll trace messages created by the components of the phone software can be sent to a remoteserver using the syslog protocol. This is helpful especially for long-term observations with agreater number of phones.To enable remote tracing, Remote trace status must be set to "Enabled". Furthermore, the IPaddress of the server receiving the syslog messages must be entered in Remote ip, and thecorresponding server port must be given in Remote port.With version V2, the User notification parameter controls whether the user is notified aboutthe remote tracing or not. If user notification is enabled, a blinking symbol ( on OpenStage60/80; on OpenStage 15/20/40) will inform the user when remote tracing is active, that is,when Remote trace status is set to "Enabled".Administration via Local PhoneAdministration via WBM|--- Admin|--- Maintenance|--- Remote trace|--- Remote trace status|--- User notification|--- Remote ip|--- Remote portRemote traceRemote Trace StatusUse NotificationRemote ServerEnabledRemote Server Port 514Submit ResetDisabled
