administration.fmA31003-S2030-M100-11-76A9, 01/2015OpenStage SIP V3R3 for OpenScape Voice, Administration Manual 87AdministrationSecurity3.4.3 Security LogA circular security log is used to capture important security specific events. It can be exportedas CSV data to an external application for analysis.The Max. lines parameter defines the maximum number of entry lines that can be kept in thesecurity log before old entries are overwritten by new entries.Archive to DLS controls whether the log is sent to the DLS. When activated, the DLS is usedto automatically archive the security log so that no log entries will be lost.With Archive when at, the trigger for log archiving is set. Automatic archiving of new securitylog entries will occur when the percentage of unarchived entries in the log is as specified ormore. When set to disabled, every new entry will trigger a save (only possible via DLS). Thepossible values are "10%”, ”20%”, ”30%”, ”35%”, ”40%”, ”45%”, ”50%”, ”55%”, ”60%”, ”65%”,”70%”, ”80%”, ”90%”.The security log upload may be accomplished in two ways:• If "Archive to DLS" is enabled, if the security log reaches the threshold % for unachievedentries, the phone will initiate an upload.• If "Archive to DLS" is NOT enabled and the security log reaches the threshold % for un-achieved entries, the phone only sets the "archive-me" flag, it does not initiate the archive.It is up to the DLS to recognize the flag and initiate an upload.Last archived shows the date when the security log was last archived to the DLS.Administration via WBMSystem > Security > Logging> The security log cannot be disabled.LoggingSubmit ResetArchive to DLSMax. lines50%Archive when at50020101105-0010Last archived
