VDO CONTISYS OBD Instruction Manual

Also see for CONTISYS OBD -: Brochure Manual Quick reference guide Quick reference guide Instruction manual

FastCheck30Power for the service tool is provided by the vehicle connector. Once connected, theservice tool will perform an internal self test and then the screen will display the versionof the current software before displaying the main menu.Use the and keys to select the 'FastCheck EPB' application and press toconfirm the selection. To return to the previous menu, press the key.Turn the vehicle's ignition ON.Use the and keys to select the vehicle manufacturer and press to confirmthe selection.Dependent upon the vehicle manufacturer and model different menu options will thenbe available. Function such as read and Clear DTCs will be available along with servicefunctions.Ford – Electronic Parking Brake (EPB) systemTwo Electronic Parking Brake systems are currently supported on the service tool:Ford Focus C-Max 2003 - present:There are two test functions available under the calibration section of the EPB menuthese are described below.Electronic Parking Brake (EPB) calibration function testChecks the EPB is working correctly. This test should be performed after work hasbeen completed on the EPB or vehicles braking system.The test removes any air gap from the brake pads and checks the EPB pressure.Pre-Test conditions:• The vehicle must be stationary• The vehicle must be on level ground• The brake fluid level is correctThe operator will be asked to perform a number of actions before applying the EPB.The service tool reads and displays the EPB pressure. With the EPB applied the EPBpressure should be approximately 1100 Newtons.The operator will then be asked to unlock/release the EPB. The service tool reads anddisplays the EPB pressure. With the EPB released the EPB pressure should be 0Newtons.MAIN MENU1. EOBD2. FastCheck ABS3. FastCheck Airbag4. FastCheck Climate5. FastCheck EPB6. FastCheck SAS7. FastCheck Service8. User Menu