VDO CONTISYS OBD Instruction Manual

Also see for CONTISYS OBD -: Brochure Manual Quick reference guide Quick reference guide Instruction manual

FastCheck35Brake pad replacement/service sequenceThe EPB system must be deactivated and completely released and the ignition mustbe on.Note: The sequence must be performed in the correct order else the braking systemmaybe left in a non-operational state.Release brakesSelect the 'Release Brakes' option from the menu. The brake pistons will now bemoved to their released position. Wait until the service tool displays the release brakesnow complete message before continuing.Replace/service the brake padsThe brake pads can now be replaced or serviced following the manufacturer’sinstructions.Close brakesSelect the 'Close Brakes' option from the menu. The brake pistons will now be movedto their reset position. Wait until the service tool displays the close brakes nowcomplete message before continuing.Calibrate brakesSelect the 'Calibrate Brakes' option from the menu. The brake pistons will now bemoved in and out to calibrate their position. Wait until the service tool displays thecalibrate brakes now complete message before continuing.EPB for Audi A8Select the required option from the Maintenance menu either 'Replace Pads' or'Service Brakes' then follow the required sequence.Brake pad replacement sequence (only)The EPB system must be deactivated and completely released and the ignition mustbe on then follow the sequence described below.Note: The sequence must be performed in the correct order otherwise the brakingsystem maybe left in a non-operational state.Replace padsSelect the 'Replace Pads' option from the 'Replace Pads' menu. The brake pistonswill now be moved to their released position. Wait until the service tool displays therelease brakes now open for pad change message before continuing.Replace the brake padsMake a note of the new pad thickness (3-14mm) it is required for the next stage. Thebrake pads can now be replaced following the manufacturer’s instructions.