68 • vacon control panel77.4.5 System menuSYS menu including fault submenu, field bus submenu and system parameter sub-menu, and the display and operation of the system parameter submenu is similar toPAR menu or MON menu.In system parameter submenu, there are some editableparameter (P) and some uneditable parameter (V).The Fault submenu of SYS menu includes active fault submenu and fault history sub-menu.Figure 7.6: Fault menuIn active fault situation, FAULT arrow is blinking and the display is blinking activefault menu item with fault code. If there are several active faults, you can check it byentering the active fault submenu F5.x. F5.1 is always the latest active fault code. Theactive faults can be reset by pressing BACK / RESET button with long time (>2 s),when the API is in active fault submenu level (F5.x). If the fault cannot be reset, theblinking continues. It is possible to select other display menus during active fault, butin this case the display returns automatically to the fault menu if no button is pressedin 10 seconds. The fault code, subcode and the operating day, hour and minute val-ues at the fault instant are shown in the value menu (operating hours = displayedreading).OKPress OK to enter V1.11 Press Left/Right buttonto browse other groups2Press down to browseother active faults3REFMONPARSYSFAULTALARMSTOPFWD R EV I/O K EYPAD BUSREADY RU NOKPress OK to select one faultto browse its time4REFMONPARSYSFAULTALARMSTOPREADY RU NFWD R EV I/O K EYPAD BUSBrowse for fault code(C xx),subcode(Id xx), days(d xx),hours(H xx), minutes(M xx)5REFMONPARSYSFAULTALARMSTOPREADY RU NFWD R EV I/O K EYPAD BUSREFMONPARSYSFAULTALARMSTOPREADY RU NFWD R EV I/O K EYPAD BUSREFMONPARSYSFAULTALARMSTOPREADY RU NFWD R EV I/O K EYPAD BUS
