82 • vacon parameters88.9 Digital outputs (Control panel: Menu PAR -> P8)P7.5 Encoder direc-tion 0 2 0 12330 = Disable1 = Enable / Normal2 = Enable / InvertedP7.6 Encoder pulses /revolution 1 65535 ppr 256 629Pulse count of encoderper round. Used for scal-ing encoder rpm monitorvalue only.Config DI5 andDI6 0 2 0 11650 = DI5 and DI6 are fornormal digital input1 = DI6 is for pulse train2 = DI5 and DI6 are forencoder frequence modeCode Parameter Min Max Unit Default ID SelectionsP8.1 RO1 signalselection 0 Varies 2 3130 = Not used1 = Ready2 = Run3 = Fault4 = Fault Inverted5 = Warning6 = Reversed7 = At Speed8 = Motor regulator active9 = FB Control Word.B1310 = FB Control Word.B1411 = FB Control Word.B1512 = Output freq superv.13 = Output torque superv.14 = Unit temperature superv.15 = Analogue input superv.16 = Preset Speed Active17 = External Brake ctrl18 = Keypad control active19 = I / O control active20 = Temperature supervisionP8.2 RO2 signalselcetion 0 Varies 3 314 As parameter 8.1P8.3 DO1 signalselcetion 0 Varies 1 312 As parameter 8.1Table 8.9: Digital outputsCode Parameter Min Max Unit Default ID NoteTable 8.8: Pulse train/EncoderP7.7iiiiii
