60 • VACON® arfiff08 power generationLocal contacts: http://drives.danfoss.com/danfoss-drives/local-contacts/5.12.7.5 Q(U) PowerCode Parameter Min Max Unit Default Cust ID DescriptionP2.17.11.7.1 High Max Q Power -300 300 % 0,0 3341P2.17.11.7.2 High Max Voltage 0 200 % 105,00 3340P2.17.11.7.3 High Min Voltage 0 200 % 100,00 3339P2.17.11.7.4 Low Max Q Power -300 300 % 0,0 3344P2.17.11.7.5 Low Max Voltage 0 200 % 100,00 3343P2.17.11.7.6 Low Min Voltage 0 200 % 95,00 33425.12.8 Power Limit5.12.8.1 High FrequencyCode Parameter Min Max Unit Default Cust ID DescriptionP2.17.12.1.1 HighFreqModes 0 1 0 3307 0 = High Limit1 = MinimumP2.17.12.1.2 HighFreqLowCornr 0 200 % 0,00 3295P2.17.12.1.3 HighFreqPLimSlop -1 300 %/Hz 50,0 3239End corner modeactivated by setting thisto zero ->- P2.17.12.1.7- P2.17.12.1.8P2.17.12.1.4 HighFreqLockOut 0 150 % 0,00 3308P2.17.12.1.5 HighFreqPLimRamp -1 320 %/s -1,00 3298P2.17.12.1.6 HighFreqPReleDel 0 1000000 ms 50 3299P2.17.12.1.7 HighLFFullPRelDe 0 400000 ms 0 3374P2.17.12.1.8 HighFreqHigCornr 0 200 % 0,00 3296P2.17.12.1.9 HighFreqPowRatio 0 100 % 0,0 33095.12.8.2 High VoltageCode Parameter Min Max Unit Default Cust ID DescriptionP2.17.12.2.1 Log In Voltage 0,00 320,00 % 0 3325P2.17.12.2.2 Log Out Voltage 0,00 320,00 % 0 3326P2.17.12.2.3 Limit Slope -1,0 3200,0 %/% 0,0 3327P2.17.12.2.4 PowerLmVoltMode 0 1 0 33605.12.8.3 Low Frequency PowerCode Parameter Min Max Unit Default Cust ID DescriptionP2.17.12.5.1 Power Increase HighFrequency 0,00 150,00 % 0,00 3334P2.17.12.5.2 Power Increase Slope 0,0 200,0 %/% 15,0 3335P2.17.12.5.3 Power Increase Max 0,0 200,0 % 200,0 3336
