78 • VACON® arfiff08 power generationLocal contacts: http://drives.danfoss.com/danfoss-drives/local-contacts/6.3.3 Digital outputsP2.3.3.1 Ready Signal DO SelectionID 432P2.3.3.2 Run Signal DO SelectionID 433P2.3.3.3 Fault Signal DO SelectionID 434P2.3.3.4ID 435P2.3.3.5 Warning Signal DO SelectionID 436P2.3.3.6 Main Contactor Control Signal DO SelectionID 445P2.3.3.7ID 440P2.3.3.8 DC Earth Fault Signal DO SelectionID 441P2.3.3.9 Ready/Warning Blink Signal DO SelectionID 442P2.3.3.10 External Fan Control Signal DO SelectionID 443P2.3.3.11ID 444they have to be disconnected from the grid, due to Grid Code requirement or fault, butthe master drive is not wanted to be disconnected.P2.3.3.12 Power Limitation Active Signal DO SelectionID 446This signal indicates if selected Power Limit Reference (P2.3.3.19.2) is lower than triggerlevel (P2.3.3.19.1).P2.3.3.13 Power Limit Reference Too Low DO SelectionID 449External Power Limit Reference (Panel, Fieldbus, Digital or Analog Input) has been setand the Actual Power Limit value has ramped too low and the inverter has stopped.P2.3.3.14 Drive Charged Signal DO SelectionID 450P2.3.3.15 Drive Ok Signal DO SelectionID 451P2.3.3.16 Drive Ok/Warning Blink Signal DO SelectionID 452P2.3.3.17 Fault or Grid Code related stopID 453P2.3.3.18 Charging Pulse for External DevicesID 454The length of the this pulse can be set by P2.3.3.19.3
