CONTROL KEYPAD vacon • 10777.1.2 Control place indicationsThe symbolsI/O term, Keypad andBus/Comm (see Figure 60) indicate the choice of control placemade in the Keypad Control Menu (see Chapter 7.3.3).7.1.3 Status LEDs (green – green – red)The status LEDs light up in connection with the READY, RUN and FAULT drive status indicators.7.1.4 Text linesThe three text lines (•, ••, •••) provide the user with information on his present location in thekeypad menu structure as well as with information related to the operation of the drive.I/O term = I/O terminals are the selected control place; i.e. START/STOP commandsor reference values etc. are given through the I/O terminals.Keypad = Control keypad is the selected control place; i.e. the motor can be startedor stopped, or its reference values etc. altered from the keypad.Bus/Comm= The frequency converter is controlled through a fieldbus.= Illuminates with the AC power connected to the drive and no faults are active.Simultaneously, the drive status indicator READY is lit up.= Illuminates when the drive is running. Blinks when the STOP button has beenpushed and the drive is ramping down.=Blinks when unsafe operating conditions were encountered due to which the drivewas stopped (Fault Trip). Simultaneously, the drive status indicator FAULT blinks onthe display and the fault description can be seen, see Chapter 7.3.4, Active Faults.• = Location indication; displays the symbol and number of menu, parameter etc.Example: M2 = Menu 2 (Parameters); P2.1.3 = Acceleration time•• = Description line; Displays the description of menu, value or fault.••• = Value line; Displays the numerical and textual values of references, parametersetc. and the number of submenus available in each menu.abcIIIIIIPhone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
