7vacon • 108 CONTROL KEYPAD7.2 Keypad push-buttonsThe Vacon alphanumeric control keypad features 9 push-buttons that are used for the control of thefrequency converter (and motor), parameter setting and value monitoring.Figure 61. Keypad push-buttons7.2.1 Button descriptions= This button is used to reset active faults (see Chapter 7.3.4).= This button is used to switch between two latest displays. May be useful whenyou want to see how the changed new value influences some other value.= The Enter button serves for:1) confirmation of selections2) fault history reset (2…3 seconds)= The Enter button serves for:1) confirmation of selections2) fault history reset (2…3 seconds)= Browser button downBrowse the main menu and the pages of different submenus.Edit values.= Menu button leftMove backward in menu.Move cursor left (in parameter menu).Exit edit mode.Swap between keypad control and another control as active control place (seeChapter 7.2.1.1)= Menu button rightMove forward in menu.Move cursor right (in parameter menu).Enter edit mode.= Start buttonPressing this button starts the motor if the keypad is the active control place.See Chapter 7.3.3.3063_00resetselectenter+-Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
