2vacon • 12 EU DIRECTIVE2.2.4.1 IT networksThe grounding of input capacitors made by default with the grounding screw at terminal X41 of thebus board in all drives is imperative in all variations of TN/TT networks. Should a drive originallypurchased for TN/TT networks be used in an IT network, the screw at X41 must be removed. It isstrongly recommended that this be done by Vacon personnel. Ask you local distributor for moreinformation.2.2.5 Manufacturer's declaration of conformityThe following pages present the Manufacturer's Declarations of Conformity assuring thecompliance of Vacon frequency converters with the EMC-directives.EC DECLARATION OF CONFORMITYWeManufacturer's name: Vacon OyjManufacturer's address: P.O.Box 257eitnirosnuRasaaV18356-NIFdnalniFhereby declare that the productProduct name: Vacon NX Liquid-Cooled Frequency converterModel designation: Vacon NX Liquid-Cooled 0016 5…. to 4140 5…..…68....0013ot.…68.... to 31000710delooC-diuqiLXNnocaVVacon NX Liquid-Cooled 0170has been designed and manufactured in accordance with the followingstandards:Safety: EN 60204-1:2006+A1:2009 (as relevant)EN 61800-5-1:2007EMC (immunity): EN 61800-3:2004 (only immunity)and conforms to the relevant safety provisions of the Low Voltage Directive(2006/95/EC) and EMC Directive 2004/108/EC.It is ensured through internal measures and quality control that the productconforms at all times to the requirements of the current Directive and therelevant standards.In Vaasa, 24th of March, 2011Vesa LaisitnediserPThe year the CE marking was affixed: 200211429_00Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
