Vaillant geotherm exclusive Installation Instructions Manual

Also see for geoTHERM exclusive: Operating manual

Contents

Vaillant geotherm exclusive Installation Instructions Manual Manual pdf 69 page image

69geoTHERM exclusive VWS 0020051614_00 installation instructions8.9 Installer MenuSpecial functions can be selected only from the basicdisplay. To do so press the left-hand dial .To change the parameter, you must turn the dial. Thefollowing special functions can be selected:• Energy saving function: Press dial once.• Party function: Press dial twice.• One-time charging: Press dial 3 x.• Cooling operation: Press dial 4 xTo activate one of the functions, you merely have to se-lect it. In the energy saving function it is additionallynecessary to enter the time until which the energy sav-ing function (regulation to set-back temperature) is toapply.The basic display appears either after the function haselapsed (reaching the time) or by pressing the dialagain.Display shown DescriptionWe 16.02.08 9:35Energy saving enabled>Select end timeEnergy-saving function:With the saving function you can set back the heating times for a set-table period.Enter the time for the end of the saving function in the format hh:mm(hour:minute).We 16.02.08 9:35Party function enabledParty function:With the party function you can set the heating and hot water timesbeyond the next switch off time on to the next start of heating. Theparty function can only be used for the heating circuits or hot watercircuits for which the operating mode "Auto" or "ECO" is set.We 16.02.08 9:35one-timeDHW tank loading enabledOne-time DHW tank loading:This function allows you to charge the hot water cylinder once, re-gardless of the current time program.Table 8.5 Special functionsController 8