Veeder-Root TLS Series Manual

Also see for TLS Series: Application guide

Contents

Veeder-Root TLS Series Manual Manual pdf 32 page image

Wiring/Miscellaneous For TLS-IB Consoles W/RS-232 & With & W/O IFSF) TLS-IB Specifications4-135. Replace the board by reversing the above steps.6. Switch On power to the TLS-IB and check your system configuration for proper setup.NEURON SERVICE SWITCHTo manually transmit the TLS-IB neuron ID, press S1 (service switch) shown in Figure 4-9. The figure also locatesthe IFSF LED (D1) which indicates if the neuron application is, or is not, running. If the IFSF status indication LED(D1) remains lit, replace the CPU board (see “Replacing the CPU Board” on page 4-8).Figure 4-9. Manually Transmitting Neuron IDTLS-IB SpecificationsPHYSICAL SPECIFICATIONS• Width w/door closed: 188 mm (7.6”) - Width w/door open: 235 mm (9.6”).• Height: 163 mm (6.7”).• Depth w/door closed: 50 mm (2.6”), Depth w/door open: 228 mm (9”).• Weight: 1.8 kg (3.5 lbs).• The TLS-IB unit contains two PC boards: CPU (in door) and Power Supply (in unit).• Removable plug type connections.• Conduit knockouts for intrinsically-safe wiring: 1/2”, 3/4”, and 1” I.P.S. (2 places).SGL DBLBAWIRING SIDEGJ4D1LED1IFSFJP3J8U8J7L1S1SERVICERAMtlsnt\ifver.epsIFSFCLRNMLCLRR12-001331470R12-002R12-003R12-004R12-005R12-006Pressing S1, lights the IFSFLED (D1) and forces nodeto transmit its Neuron ID.Transmit Neuron IDTransmit Neuron IDThe Amber IFSF LED (D1)should not be lit when theneuron application is running.This LED remains lit if theneuron is in an unconfiguredstate (the neuron applicationis not running).Neuron ConfigurationNeuron Configuration