Veeder-Root TLS Series Manual

Also see for TLS Series: Application guide

Contents

Veeder-Root TLS Series Manual Manual pdf 45 page image

Wiring/Miscellaneous For TLS-IB Consoles W/RS-232 & RS-485 TLS-IB Specifications5-9WIRING CONNECTIONSThe TLS-IB SCI wiring connections to J3 (on TLS-IB CPU/Power Supply Board, see Figure 5-2 on page 5-3) areshown in Table 5-2.SERIAL INTERFACE COMMANDSVeeder-Root RS-232 command protocol format applies. Table 5-3 lists the serial commands recognized by theTLS-IB:Table 5-2. SCI Wiring ConnectionsTLS-IB J3 Connector Laptop Serial Port ConnectorRS-232 Serial InterfaceA (receive) TXD (pin 2)B (transmit) RXD (pin 3)G (signal ground) GND (pin 5 DB9, pin 7 DB25)RS-485 Serial InterfaceA (receive) AB (transmit) BG (signal ground) GTable 5-3. TLS-IB Serial CommandsCommand Description001 System Reset002 Clear Power Reset Flag003 Remote Alarm Reset201 In-Tank Inventory Report (height, water, and temp only)205 In-Tank Status Report214 In-Tank Mass/Density Inventory Report233 Density Offset History Report234 In-Tank Mass/Density Inventory Report 2504 Set RS-232 Security Code50D Set Print Temperature Compensation Flag50E Set Temperature Compensation Value514 Set H-Protocol Height/Volume Format517 Set System Type & Language Flags (ext. lang. set)

/ 48

Related manuals for Veeder-Root TLS Series