Veeder-Root TLS Series Manual

Also see for TLS Series: Application guide

Contents

Veeder-Root TLS Series Manual Manual pdf 34 page image

Wiring/Miscellaneous For TLS-IB Consoles W/RS-232 & With & W/O IFSF) TLS-IB Specifications4-15• Veeder-Root RS-232 command protocol format applies. Table 4-3 lists serial commands recognized by the TLS-IB:SIGNAL INPUT SPECIFICATIONS• Up to 8 Veeder-Root Magnetostrictive probes can be monitored.• Probe data: 0.2 A at 13 volts.Table 4-2. TLS-IB Serial Interface ConnectionsJ7 Connections Computer Terminal (DB-25 Connector)A (receive) TXD (pin 2)B (transmit) RXD (pin 3)G (signal ground) GND (pin 7)Table 4-3. TLS-IB Serial CommandsCommand Description001 System Reset002 Clear Power Reset Flag003 Remote Alarm Reset201In-Tank Inventory Report (height, water, and temponly)205 In-Tank Status Report517 Set System Type & Language Flags (ext. lang. set)601 Set Tank Configuration62F Set Mag Probe Float Size881 Set Communication Port Data882 Initialize Communication Port Data902 System Revision Level ReportA01 Probe Type and Serial NumberA02 Probe Factory Dry Calibration ValuesA10 Probe Last Sample BuffersA11 Probe Fast Average BuffersA12 Probe Standard Average Buffers