WAGNER GM 5000EA Operating Manual

Also see for GM 5000EA: Translation of the original operating manual Operating manual

Contents

WAGNER GM 5000EA Operating Manual Manual pdf 12 page image

12GM 5000EAC USOPERATING MANUALEDITION 03/2012 ORDER NUMBER DOC 2319149)GNITIONTEMPERATUREOFTHECOATINGMATERIAL %NSURETHATTHEIGNITIONTEMPERATUREOFTHECOATINGMATERIALISABOVETHEMAXIMUMSURFACETEMPERATURE3URFACESPRAYING ELECTROSTATIC $ONOTSPRAYUNITPARTSWITHELECTROSTATICEGELECTROSTATICSPRAYGUN -EDIUMSUPPORTINGATOMIZING 4OATOMIZETHEMATERIAL USEONLYWEAKLYOXIDIZINGGASES EGAIRCleaningIf there are deposits on the surfaces, the unit may form electrostatic charges. Flames orsparks can form if there is a discharge.Remove deposits from the surfaces to maintain conductivity.Use only a damp cloth to clean the unit.2.6 GERMAN REGULATIONS AND GUIDELINESa) BGV A3 Electrical units and equipmentb) BGR 500 Part 2, Chap. 2.36 Working with liquid ejection devicesc) BGR 500 Part 2, Chap. 2.29 Using coating materialsd) BGR 104 Explosion protection rulese) TRBS 2153 Avoiding ignition risksf ) BGR 180 Setting up for cleaning with solvents for cleaning workpieces withsolventsg) ZH 1/406 Guidelines for liquid ejection devicesh) BGI 740 Painting rooms and equipmentj) BGI 764 Electrostatic coatingj) Betr.Sich.V. Plant Safety OrdinanceNote: All titles can be ordered from Heymanns Publishing House in Cologne, or they areto be found in the Internet.2.5.3 EXPLOSION PROTECTION IDENTIFICATION FMFor Electrostatic Finishing Applicationsusing Class I, Group D, Spray MaterialIn accordance with 2316160This device has been manufactured and tested according to the FM (Factory Mutual)standard „Class Number 7260“ (Approval Standard for Electrostatic Finishing Equipment)by FM. All tested combinations of devices including accessories are given in the FM ControlDocument with part number 2316160.(the device is in submission)